Steel North Shore & Steel South Auckland Galvanised Hollow Section

Galvanised Hollow Section

Product Code: GRHS
A uniform coating of zinc, with a minimum mass of 100g/m² on BOTH the outside and the inside gives protection for many appplications.

Specifications:	AS 1163 - 1991 Grade C650L0/C450L0
	AS/NXS 4792 Galvanised coatings on ferrous hollow sections
Size Specification:	Long edge dimension LED (mm) x short edge dimension SED (mm)
	x wall thickness (mm) x length (mm)
Supplied Condition:	Minimum yield strength: 450 MPa Minimum tensile strength: 500 MPa

Displaying 1 to 10 (of 49 products)	Result Pages: 1 2 3 4 5 [Next >>]

20mm x 20mm x 1.6mm galv h/s	20mm x 20mm x 1.6mm x 0.87mass (kg/m)

25mm x 25mm x 1.6mm galv h/s	25mm x 25mm x 1.6mm x 1.12mass (kg/m)

25mm x 25mm x 2.0mm galv h/s	25mm x 25mm x 2.0mm x 1.36mass (kg/m)

25mm x 25mm x 2.5mm galv h/s	25mm x 25mm x 2.5mm x 1.64mass (kg/m)

30mm x 30mm x 1.6mm galv h/s	30mm x 30mm x 1.6mm x 1.38mass (kg/m)

30mm x 30mm x 2.0mm galv h/s	30mm x 30mm x 2.0mm x 1.68mass (kg/m)

35mm x 35mm x 1.6mm galv h/s	35mm x 35mm x 1.6mm x 1.63mass (kg/m)

35mm x 35mm x 2.5mm galv h/s	35mm x 35mm x 2.5mm x 2.42mass (kg/m)

40mm x 40mm x 1.60mm galv h/s	40mm x 40mm x 1.60mm x 1.88mass (kg/m)

40mm x 40mm x 2.0mm galv h/s	40mm x 40mm x 2.0mm x 2.31mass (kg/m)


Displaying 1 to 10 (of 49 products)	Result Pages: 1 2 3 4 5 [Next >>]

NORTH SHORE: 09 444 0840 sales@steelnorthshore.co.nz
SOUTH AUCKLAND: 09 263 5806 sales@steelsouthauckland.co.nz